cetme rifle help

jdb123

August 29, 2002 20:09

how do i remove the grip assembly on the cetme rifle, the manual says to just do it, but not how to do it. thanks

Comments

3 comments

punchie

August 30, 2002 00:30
Try this site for more CETME info than you may want to know.
http://www.geocities.com/miketheelectrician1/section2.html?1011759198960

AN ARMED SOCIETY IS A POLITE SOCIETY
0
kimberkid

August 30, 2002 04:50
To remove the grip assy, first you must pull out the 2 pins that retain the butt stock and slide it off, then the grip assy will pretty much fall in your lap.

======================================================
Just because your paranoid doesn't mean they aren't out to get you!kimberkid@gunbroker.zzn.com
0
oneshy

August 30, 2002 07:19
You'll have to use a punch on the 2 pins to depress the springs. You may have to work the stock off by pulling a little then tapping the butt up and down on the floor then pulling a little more. The 2 holes in the butt are there to hold the pins so you don't lose them.
0

Please sign in to leave a comment.