Remington-Browning Sportsman disassembly

DENWA

August 02, 2002 15:55

How do I remove the Magazine well spring and plug?

My Shotgun is the 16 ga model it has the pheasents on one side of the reciever and the ducks on the other. I really need some help here so any would be appreciated.

thanks

You are what you eat? I guess I'm a beaver!

Edited by - DENWA on 08/02/2002 19:56:54

0

• 

  bullelk

  August 02, 2002 17:29

  Put the gun, buttstock down on the floor. Push the barrel down against the spring and unscrew the knob.
  After the knob is off, pull the forearm off, then pull the barrel out of the action. The rest you should be able to figure out. If not, call back.
  
  MAKE SURE THE GUN IS UNLOADED !!!
  
  
  "If All Else Fails, Read The Directions"
  
  
  
  Edited by - bullelk on 08/02/2002 21:31:25

  0
• 

  DENWA

  August 02, 2002 22:57

  BULL, I ve already gotten that far just can't figure anything else past there. I cannot figure how to remove the part that the forearm screw bolts into. It does not seem to be removeable. What do I do from here?
  
  thanks again
  
  You are what you eat? I guess I'm a beaver!

  0
• 

  bullelk

  August 03, 2002 02:56

  DENWA,
  
  When you look down into the magazine tube, you will see a split ring bushing that retains the spring in the tube. Kind of like pull and turn that bushing out very carefully and keep the spring from spring out at you. That bushing is friction fit.
  
  If you need anymore help, you can e-mail me at;
  bullelk@psouth.net

  0
• 

  DENWA

  August 03, 2002 08:12

  SO that is NOT supposed to be welded or Braised on there!
  
  thanks, this just turned real ugly.
  
  You are what you eat? I guess I'm a beaver!

  0
• 

  bullelk

  August 03, 2002 15:04

  DENWA,
  Why did it turn ugly??

  0

Please sign in to leave a comment.