Skip to main content
Help Center Community Shop

Cap n' Ball Revolver....

Hunter4life
Hey all,

Ive always wanted a black powder pistol, sooo...

I bought a Piette model 1858 New Army Revolver
from Cabelas...just had to do it !!! Now i
have questions...Its a .44 and shoots a.451 dia
lead ball, powerd by a 30 gr Pyrodex pellet..
Anyone know the approx muzzle velocity and
energy? Does Piette manufacture a reputable
product? or is it crap? Do cheap replicas go
up in value? This is my first step into a new
hoby, ANY information at all would be
appreciated.
thanks.........
0

Comments

11 comments

Date Votes
  • Shootist3006
    Welcome to the DIRTIEST shooting sport there is. It is a great sport and LOTS of good people. Never tried the pyrodex pellets but 30 gr. of BP is a pretty stout load, should give about 1050 to 1100 FPS!!! Don't forget to seal the cylinder with either grease on top (I use Crisco) or with a lubricated wad. I have 3 of Cabella's 1858 Remingtons and shoot them all the time. Good product for the money. I will be shooting them in a match next week - a re-creation of the Gunfight at the OK Corral.

    Quod principi placuit legis habet vigorem.Semper Fidelis
    0
  • allen griggs
    Pietta makes a pretty good gun. Not the most expensive replica, but far from junk. I don't think you will see much appreciation on this gun, maybe some depreciation. But, they are beautiful and a lot of fun.

    "Not as deep as a well, or as wide as a church door, but it is enough."
    0
  • aglore
    Now you need to buy the replacement cylinder so you can shoot 45 Colt in it.

    AlleninAlaska

    Free men are not equal and equal men are not free
    0
  • ndbilly
    I started using Bore Butter as a sealant in all my BP revolvers and found that I could shoot longer between "gum-ups". A little more $ than Crisco but it worked for me
    0
  • allen griggs
    AGLORE: Tell me about the replacement cylinder for shooting the .45 Colt. Is this used in the replica of the Colt or the Remington?

    "Not as deep as a well, or as wide as a church door, but it is enough."
    0
  • aglore
    Taylor's $ Company make a replacement cylinder for these replica percussion guns that will fire 45 Colt cartridges. they will only handle the low powered factory loads. I know they make one for the 1858 Remington. Don't know if they have a website or not or if they make them for other 44 blackpowder guns.

    AlleninAlaska

    Free men are not equal and equal men are not free
    0
  • aglore
    http://www.taylorsfirearms.com

    There ya go. Website for the replacement cylinders.

    AlleninAlaska

    Free men are not equal and equal men are not free
    0
  • allen griggs
    Thanks, Aglore, the info I get on these forums is amazing.

    "Not as deep as a well, or as wide as a church door, but it is enough."
    0
  • allen griggs
    Oops, the damn cylinder costs more than the gun. Still, thanks for the info. Very interesting.

    "Not as deep as a well, or as wide as a church door, but it is enough."
    0
  • Tailgunner1954
    All the advise about greasing the front of the loaded chambers to prevent "circle fire" is good (and correct), however one thing that was missed is to cap every loaded chamber also. Yes, you can get "circle fire" from the flashover at the nipple end also. Trust me you don't want to experance having 2-6 chambers fire with one trigger pull.
    Some guys like a mag full of lead, I still prefer one round to the head.
    0
  • AdamsQuailHunter
    Hello Hunter4life

    The Captain is going to see that this topic has 10 or more responses and have Scotty beam a lock on it. I am going to try to sneak this one in under the wire before he does.

    One -- welcome to the world of black powder!!!!!

    Two -- the information given to you about sealing the cylinders using lubricated wads over the powder or "Crisco" or "Bore Butter" is accurate. Where I am in Florida, they tend to melt out because we still have very HOT days during muzzle-loading season. I have used Kendall Super Blu High Temp grease with some success, but have mostly gone to lubricated wads over the powder.

    Three -- your instructions may not tell you but DON'T let the hammer rest on a live cap. There are "safety" notches between the nipples. Let the hammer rest in one of the "safety" notches between the nipples and not on a live cap.

    Be Safe And Enjoy Black Powder Firearms:

    Best Regards To You And Yours
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?