Ithaca

toold

July 31, 2002 03:36

Did Ithaca make a 12 with a 20" smooth bore barrel with iron sights and a 3" chamber.
I know they made them with a 2 3/4 chamber. I thought all the 3" were rifled barrels.

I don't believe they did but I see one for sale in a local add.

Thanks

Mark

0

• 

  toold

  July 31, 2002 03:36

  Need help finding d.o.m for model 37 featherlight
  standard. s.n. 10137xx Also f. sight is missing,
  but no hole in barrel. was it glue on?
  
  thanks for the help. DON
  
  DON

  0
• 

  MIKE WISKEY

  July 31, 2002 05:02

  CANN'T HELP WITH THE MGF. DATE (IT IS A LATTER ONE, MGF. AFTER 1960 OR SO) BUT THE BARREL HAS BEEN CUT. PROBABLY NO CHOKE LEFT.

  0
• 

  Prescott Pete

  July 31, 2002 08:36

  Don,
  Look up Ithacagun on the web. Put in the serial# and they will tell you D.O.M.
  Hope this helps
  Joel

  0
• 

  toold

  July 31, 2002 09:24

  thanks guys will try to look up
  don
  
  DON

  0
• 

  v35

  July 31, 2002 15:22

  Check if it's an older one that needs barrel fitting at the factory.
  There are gunsmiths that specialize in installing thin wall threaded choke tubes in thin wall or cut off shotgun barrels. They can also install a front sight. The Ithaca style front bead with plastic insert shows up good under dim conditions.
  If you end up going for a new barrel go for the ventilated rib.
  These are great shooting guns.

  0
• 

  bullelk

  July 31, 2002 17:12

  Probably was cut. Take it to a gunsmith and ask him to check it with a choke guage. He shouldn't charge you much, if at all.
  
  "If All Else Fails, Read The Directions"

  0

Please sign in to leave a comment.