Rem 700 stock clip modification...

11echo

July 27, 2002 06:18

I have an older 700 Rem ADL, which I converted to the after the market "quick-clip". It works ok, but now I see the Remington has come out with a detachable clip on there newer 700's. My question is this, does anybody have any experience getting the parts from Remington and making this modification? I've heard thru the "grapevine" Remington doesn't like to do this type of thing. Anybody have any knowledge? THX! ...Mark

"FEAR the Goverment, that fears your ARMS"

0

• 

  Mobuck

  July 27, 2002 10:53

  I don't know how remington sells factory parts but you might have to go through a factory repair shop to get those parts. Very likely you would need to modify the inletting of the floorplate.
  
  Mobuck

  0
• 

  bullelk

  July 27, 2002 15:52

  I beleive there was a company that made an after market c0nversion, but I'll be damned if I can think of it. Try calling Remington and see if you can't buy the parts from them.
  
  Their # should be 1-800-243-9700
  
  "If All Else Fails, Read The Directions"

  0
• 

  rem700man

  July 27, 2002 17:57

  Got my parts off Ebay a little notching and sanding seems to work fine and looks good. One guy on there has them every once in awhile brand new.

  0
• 

  hotrodusa

  July 28, 2002 13:36

  Here's the link to the person that sells the parts you need, He does not have anything listed right now, You can save this link and keep checking it or just email him and see if he has the parts, Likely he does.
  
  http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewSellersOtherItems&userid=truxrme&include=0&since=-1&sort=3&rows=25
  
  This guy is a nice person to deal with.
  
  Good luck
  Robert

  0

Please sign in to leave a comment.