mauser 1903

jimkane

July 09, 2002 09:44

I have an old 1903 turkish mauser I have been meaning to restore it but it seams I am missing a tool necessary for taking it down. on the side there is what looks like a round nut with two holes in it. I believe I need a special tool in order to take this off and remove the barrel from the stock. Anyone know where I can find one? Thanks


Live for Peace, prepare for War

0

• 

  11echo

  July 09, 2002 11:44

  This "pin" would it be in the area of the front of the receiver? I'm guessing here (about your particular model) but my experience in the pass with other military weapons of the period, this a cross bolt. This was used to strengthen the stock area around the from recoil lug on the receiver. It doesn't hold the barrel ...it doesn't hold anything ...just re-enforcement. Good Luck! ...Mark
  
  "FEAR the Goverment, that fears your ARMS"

  0
• 

  captkirk3@dslextreme.com

  July 09, 2002 12:38

  11echo, is correct...! You should'nt need any tools other than a Screw Driver to take the rest of the Reciever and Barrel out of the Stock...My advise to you is Locate a Friend or a Gunsmith to show You the Correct way to disasemble the Bolt..There's a lot of Pressure against the Firing Pin Spring and if you don't know what you're doing someone could possibly be injured...If you belong to the NRA...They offer for members a detailed schmatic on how to disassemble and re-assemble all the Mauser Rifles.....Best....
  
  Captain Kirk, Tech Staff

  0
• 

  jimkane

  July 10, 2002 10:49

  thanks guys
  
  Live for Peace, prepare for War

  0

Please sign in to leave a comment.