Firing Pin Block (on Taurus Semi Auto)

rballi

June 14, 2002 06:24

I recently got a Taurus PT58 380 (Beretta, Browning copy) from a pawn shop. The gun was in good shape and it walked out with me for $200. I went to shoot it and it didn't fire. I did the pencil in the barrel thing to test the firing pin, and no bounce. I field stripped it and pushed the firing pin block in then pressed on the firing pin and the pin did protrude from the face. It turns out that the numskull who had it before or the numskull at the pawnshop sheared off the firing pin block lever when reassembling the gun. I removed the firing pin block and the gun works fine.

So, how dangerous is it without the firing pin block? Should I leave it alone until I get the parts for it? What would it really take to have an accidental discharge? Dropping the gun on the hammer or muzzle?

0

• 

  Der Gebirgsjager

  June 14, 2002 06:47

  I would send it to Taurus and take advantage of their lifetime repair policy. They offer good service and turn around. It's not so much that the pistol is less safe than the millions of semi-autos that were made without firing pin blocks; it is the liability consideration should a shooting occur either accidentally or intentionally. In the resulting lawsuit they will fry you because your pistol lacked a safety feature designed into the gun by the manufacurer.

  0
• 

  Nighthawk

  June 14, 2002 07:10

  I agree I would send it back to Taurus, I think I would feel better carring it with the firing pin block. There is one more thing to consider, if you ever have to use the gun it would look much better to your peers if you had the firing pin safety. Im sure a money hungry lawyer would have a field day with that.
  
  
  Good Luck.
  
  Rugster

  0

Please sign in to leave a comment.