Ruger P-95 question

idsman75

May 30, 2002 20:06

I purchased a Ruger P-95 w/decocker within the last few months. I wanted an inexpensive semi-auto to bang out 9mm ammo. I took it to the range and put about 500 rounds through it on Saturday to celebrate my birthday. I had 100 rounds of cheap CCI Blazer ammo that my gun ate up happily. Then I ran 50 rounds of Winchester Silvertips through it without a single hangup. Then I pulled out 350 rounds of NATO-headstamped ammo that I purchased from a local sporting goods store for about $5.00/box. This ammunition also functioned flawlessly in my gun with one exception. I'd empty a magazine, drop it, insert a loaded magazine and hit the slide release. The slide would move forward very slowly. I could look down and watch it slowly push the round up the feed ramp and into the chamber. This didn't happen with the CCI ammo. The gun was properly lubricated prior to firing and the ammo seemed to be of good quality with the exception of one that had a smushed primer. After this occurred over and over again with this ammunition I began doing something differently. Instead of hitting the slide release, I pulled back on the rear of the slide. The slide snapped forward at its normal velocity and chambered the first round without a problem.

What seems to be the problem with my gun? Is it the gun or the ammo? I purchased almost 1000 rounds of this ammo last summer when it was on sale. I ran 500 rounds of it through a Hi-Power clone and a Kel-Tec P-11 this past winter. It caused other problems with those guns. Is it the ammo? Is it the gun? I guess I'm going to have to buy a whole lot more ammo and do quite a bit more shooting in order to figure it all out. Ain't that a shame?

P.S. I'm LOVIN' this gun!

SSG idsman75, U.S. ARMY




SSG idsman75, U.S. ARMY

0

• 

  mballai

  May 31, 2002 02:54

  The alternative technique you tried sounds like the standard SIG, Beretta, Glock etc way of chambering a first round: yank the slide back vs releasing it via the lever. At least on the guns mentioned, that's SOP.
  
  My guess is that you probably had a somewhat dirty feed ramp after 150 rounds or the Ruger really should be used like the Euro autos. If the Ruger wants to go with a yanked slide, do it.
  
  Three Precious Metals: Gold, silver and lead

  0
• 

  JustC

  May 31, 2002 05:50

  Is the gun new? sometimes the bulky guns like rugers will break in after a 1000rnds and the problem disappears. They are the best bang for your bucks though, I like em too.
  
  Happy birthday.
  
  A great rifle with a junk scope,....is junk.

  0
• 

  Nighthawk

  May 31, 2002 09:31

  The P-95 is a good overall handgun. Some officers at a neighboring Town choose to carry them as their main sidearm. At first I thought it was the fact they had to buy their own sidearms. Boy was I wrong talking about Bang for the buck you have it. I have seen many officers rack the slide to chamber the first round. It seems as if its harmless as long as you dont mind. I have a KP89t and have never had that problem, But neither have I shot Nato ammo in it.
  
  Good Luck.
  
  Rugster

  0
• 

  JudgeColt

  May 31, 2002 12:46

  The dirty ramp idea may be a cause. I suspect that the NATO ammunition has a slightly different shape or texture than the other ammunition. If the rim were slightly bigger, for instance, it would drag more intensely on the feed lips. If it works, who cares?

  0
• 

  leeblackman

  June 04, 2002 01:27

  Yea, I'm backing judge colt on this one. After firing all that other ammo your chamber was probably dirty, and the Nato stuff probably didn't have as smooth of a texture or was maybe a little bigger than the other stuff.
  
  If I'm wrong please correct me, I won't be offended.
  
  The sound of a 12 gauge pump clears a house fatser than Rosie O eats a Big Mac !

  0

Please sign in to leave a comment.