really need help

doncisler

March 11, 2002 14:16

i really need help disassembling the striker and spring from a stevens model 416 .22-cal target rifle. anyone know how or where to find a diagram / cutaway drawing??

---

0

• 

  Der Gebirgsjager

  March 11, 2002 17:14

  There is a parts diagram in the Numrich Gun Parts Corp. catalog. I have worked on these before and they are tricky. The striker is retained in the cocking piece by a cross pin. The striker has a hole in its tail to accomodate this pin, and the mainspring is held captive on the striker's tail by a "C" clip. The bolt head is also held on by a cross pin, and it contains the firing pin and firing pin extension. You can get the idea from the above mentioned diagram, as the parts are shown laid out in order of assembly. If you do not have a copy of the catalog I will be happy to mail you a xerox copy of the diagram. Send your address to: ccnorth@teleport.com

  0
• 

  doncisler

  March 14, 2002 12:36

  ccnorth@teleport.comthank you so much for your reply. the diagram is great. when i looked at the c-clip from the end of the bolt it looked for all the world like a solid disc - couldn't come out of the slot. there must be a way to push down on the other half to relieve pressure and force the c-clip out. it doesn't move easily!!!thanks again, don

  0

Please sign in to leave a comment.