Skip to main content
Chat will be unavailable Friday July 3rd, in observance of the July 4th Holiday.
Help Center Community Shop

SKS magazine

Comments

2 comments

  • mmakein
    Put the gun on safe and find the little round-shaped nipple with an indentation in the midde, just behind the trigger assembly. Push this in with a punch, screwdriver whatever you have. Give it a good whack and this should pop off the trigger assembly. Insert your mag, duckbill side first, into the well. Push it up at an angle so that the duckbill hooks on the metal of the barrel assembly. If your mag falls out from the duckbill side, this is your problem. You aren't pushing it up far enough. After making sure that the mag is correctly latched, seat the mag all the way down, making sure that the bolt is held open. Pop your trigger assembly back on and you're done. Hope this helps.[This message has been edited by mmakein (edited 02-26-2002).]
    0
  • nabob
    Thanks mmakein - -I'll give that a try.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?