Skip to main content
Help Center Community Shop

Polish Nagant M44

Comments

3 comments

  • just-shoot
    Just purchased this 1952 Polish Nagant M44 762x54. Appears to be unissued, good shape, all #'s match. Paid $89, I know their advertise at lower prices, but was able to hold and look closely at this one. Three questions: Can't figure out how to remove the bolt, so I can run some bore cleaner and oiler her up. I know it a pull & twist but can't do it, Help please. Is there something I should check or have a smith check before I fire a round, Gun shop owner said it was a shooter, not sure if he's a gun smith ? The stock has a slight stickiness to it. Is this what folks use oven cleaner and dishsoap and various products to remove? I can live with it if its normal. I believe this is the begining of my Old Military Gun Collection. Any advise is greatly appreciated.[This message has been edited by just-shoot (edited 01-12-2002).]
    0
  • gurn
    Pull the bolt to the rear and pull the trigger all the way back so the bolt clears the catch and it should come right out. I cleaned the sticky stuff off with laquer thinner and a rag. Don't shoot it just wearing a tanktop.
    0
  • jonk
    It should be safe to shoot in unissued or any other condition. Nagants are some of the least finicky, toughest guns out there, and accurate for what they are. I personally rubbed the stock down with gasoline outdoors, but lacquer thinner, oven cleaner, etc all are great. One note on ammo- most of the cheap surplus on the market is corrosive. Clean after shooting with HOT soapy water, dry, then oil.Wait till you are hooked... I have over 20 military rifles and am still buying!
    "...hit your enemy in the belly, and kick him when he is down, and boil his prisoners in oil- if you take any- and torture his women and children. Then people will keep clear of you..." -Admiral of the Fleet Lord Fisher, speaking at the Hague Peace Conference in 1899.
    0

Please sign in to leave a comment.

Recent Activity