Marlin/Glenfield Model 60
I've got a Marlin/Glenfield mod. 60, and I like it but I am looking for some items to make it shoot better(more accurate). I also need to get some replacement parts for it, so heres the first question: I found a place that has the replacment parts I need but they ask if its a new style or old style and dont provide an in on how to figure which it is, so does anyone know how I can find out? I also would like some links for places that provide "high performance" parts for this rifle(ie, trigger springs, barrels, etc.), anyone have any? thanks.
travis
Glock 19C
Henry Lever Action 22Mag
Marlin/Glenfield Mod 60
http://nationalgunbuyingday.org/banner-big.jpg
travis
Glock 19C
Henry Lever Action 22Mag
Marlin/Glenfield Mod 60
http://nationalgunbuyingday.org/banner-big.jpg
0
-
Travis, I don't believe that there are many, if any, aftermarket custom parts for the Model 60. This is one of my favorite .22s--I got rid of my Ruger 10/22 and bought a 60 which I found to be just as reliable and more accurate "out of the box". As for which replacement parts to order, they can usually figure it out for you if you tell them what your rifle's serial number is. If memory serves me properly there are actually as many as four different versions of some parts--so it's best to give them your number. The Numrich Gun Parts Corp. is a good source for these parts. 0 -
I'll have to agree somewhat with Der... They are great shooting guns, but if it isn't enough, I too would suggest a Winchester or Kimber bolt or custom Ruger 10/22. 0 -
quote:SN 2039XXXX, which would indicate a 1980 manufacture date, correct?
Beginning in 1973 the manufacture date of Marlin rifles can be determined by subtracting the first two digits of the serial number from 100. Your model 60 is considered old style.
You can lead a horse to water but....you can't make him a duck0 -
ANOTHER WAY TO TELL NEW FROM OLD IS THE EJECTOR, IF THE EJECTOR IS PART OF THE FEED RAMP CASTING IT'S OLD STYLE, IF IT LOOKS LIKE A BENT PAPER CLIP IT'S NEW STYLE 0 -
You know, if you really want to accurize it, go buy a box of federal gold medal .22lr, and group it on paper. I think you'll find it to work quite well. I tried some UM900B I had in a few of my 22's compared to a few other brand, and I tell you, ain't nothing close to that Federal Gold Medal. Though it is expensive, it will cut your groups considerably.
The Marlin 60 is probably the number one most produced firearm in US history. I have a few of them I've picked up off of people hear and there for $50-75. I remember I got one, thought it was broke, turned out that it had never been cleaned and was so gunked up with lead buildup that it wouldn't function properly. I've shot so many rounds thru 60's, I haven't got one to quit yet. And I can literally dissassemble a 60 to every component. I love them.
You really won't find any aftermarket stuff, and there's really not much you can do to one. Maybe chop up and paint the stock, put a scope or some new sights on it, cut and recrown the barrel. But its all pretty much a useless waist of time unless you just wanna practice on something.
I tell you though, if your guns just looking a little ragged out, here's what you do. Take it all apart and clean it up real good. Use some assorted steel wools and oil, and rub the little rust spots off of it. Then use some Blue Wonder and reblue it. The go down to the hardware store and get some wood finish remover, and some finish, and some real fine grit sandpaper. Strip the finish off the stock. Use a wet cloth and an iron to raise any major dings. Sand it with the grain very lightly. And refinish it. I highly recommend the old johnsons minwax paste too, after you finish it.0 -
It seem that mine was made in between the old to new switch over, as mone has the new style magazine, feedthroat and front sight and theold style stock and trigger guard. the only thing I "need" is the trigger gaurd. I just wanted to get it as accurate and efficent as possible, though it seems to be pretty much there. The ammo I used to sight in the scope was a waste, it kept jamming and was inconsistent so I knew that different ammo was a must, and thanks for the tip on ammo.
Glock 19C
Henry Lever Action 22Mag
Marlin/Glenfield Mod 60
http://nationalgunbuyingday.org/banner-big.jpg0 -
I have nothing but praise for the budget priced 60. BUT, keep it clean!!! In my experience, they seem to "dirty up" quickly, ruining reliability. Leave it alone and try as many types of ammo as you can find. And yep, the pricey stuff really is better....
The early bird gets the worm, but the second mouse gets the cheese.0 -
If you want to learn how to cut the trigger on it, let me know, I can show you how to dial it in nice. I've done quite a few Marlin 60's and you can set them up nicely without too much work. The trigger on mine I cut really light, It breaks at about 3lbs. I'm here in N. Phx off of I-17 and Northern.
PS: Definitely got to agree about keeping it clean, the loader ass'y starts jamming if it gets to dirty.
SUPPORT THE I.N.S. , THE COUNTRY THEY SAVE COULD BE YOUR OWN0 -
brownells carry almost anything you need for the model 60
page 360
or
http://www.brownells.com/aspx/NS/Store/Search.aspx0 -
quote:Originally posted by leeblackman
The Marlin 60 is probably the number one most produced firearm in US history. I have a few of them I've picked up off of people hear and there for $50-75. I remember I got one, thought it was broke, turned out that it had never been cleaned and was so gunked up with lead buildup that it wouldn't function properly. I've shot so many rounds thru 60's, I haven't got one to quit yet. And I can literally dissassemble a 60 to every component. I love them.
What[?][?][?] Just where on earth did you get the idea that the Marlin Model 60 (introduced in 1960) is "the number one most produced firearm in US history"[?][V] If I were a betting man (and I am), I would be willing to wager my next year's wages against yours, that the Winchester Model 1894/94 owns that record, and that the Winchester Model 70 isn't too far behind it. In fact, I would be willing to wager that the Winchester Model 1912/12, 1897/97, 1892/92, 1890/90, and 1906/06 were all manufactured in greater quantity than the Marlin Model 60, and that only covers Winchester made fireams. The Savage Model 1899/99 is another high volume gun, as is the Remington Model 700, 1100, and 870, Colt 1911/1911A1, and the list goes on.
Bert H.
Real Men use a SINGLE-SHOT!0 -
Yo Bert- My money is on you Partner-Bob
Love them Pre-64's!!!!0
Please sign in to leave a comment.
Comments
11 comments