Lubrication on an 11-48?
I bought an 11-48 in 20 ga this week. tried shooting it with mixed results. It ran the cheap3/4 oz rem game loads OK, but not any others I tried, AA's, win dove and quail, fed slugs. Etc. It is cycling half way and re chambering the empty while cocking the hammer. The mag tube is dry, Should it be oiled? A friend suggested that while it is bad for an 1100, it is good for an a-5 type action. what oil and how much should I use.
My border collie is smarter than your honor student.
My border collie is smarter than your honor student.
0
-
i have never had that trouble on my 11-48 12 ga it shoots everything
i do use some rem oil that comes in a sray can on it though.0 -
check the assy of the bbl onto the mag tube. the order in which you put the rings and stock on will effect the recoil. let us know. 0 -
Rich,--in the case of a Rem '48, the magazine tube outside needs to have a very light oil film on it. There is no particular requirement for the friction ring as long as it is in the forward position. I still own a 12 ga. '48 and have owned a 20 ga. When I say a very light oil film, it's just that. As an illustration, one day in a duck blind my 12 Ga. was not cycling due to a dry tube. I took the forend off and wiped the tube with outboard motor fuel since it had oil in it, and the problem was cured. A wipe with an oily rag might just do the trick for you.
Regards,
OleDuk0 -
Thanks for the input, I will lube it up and give the old girl a try tomorrow.
rich
My border collie is smarter than your honor student.0 -
Upon tearing down the gun I found that the old oil had congealed into some form of glue and was keeping the spring from sliding as it should. A little bit of marvel oil on the tube had her running like a champ. 49 out of 50 rounds. the one problem was from a bad crimp in a reload. I can live with that. Thanks again
rich
My border collie is smarter than your honor student.0 -
Tell ya' guys, keep those old '48s clean and give them a very little oil now and then and I think they'll shoot forever.
My old 12 gauge gun had 15 or so thousand rounds run thru it in a three year period, (1952-1955) and I don't know how many including a multitude of 2-3/4 inch magnums for the next 15 years. It's ready to go still.
Regards,
OleDuk0 -
Not sure about you problem but DO NOT OIL the Recoil Spring!
aguncollector@prodigy.net0
Please sign in to leave a comment.
Comments
7 comments