Skip to main content
Help Center Community Shop

Ar-15 value?

Comments

12 comments

  • hdrulz99
    I own an Ar-15 with a Colt HBAR upper, and a DPMS lower. I am interested finding out what I should ask for a price for this. Condition is great, the HBAR was slightly used when I bought it, and the DPMS lower was brand new 1 year ago.
    0
  • gunner8479
    Welcome to the forum, your mixed part AR-15 is not worth as much as an AR-15 with matching parts......probably between $400.00 to $600.00 depending on condition.....you'll probably get more for it if you sell the upper and lower separately.

    Remember, this is only my opinion......[:)]

    gunner8479
    0
  • ohioghog
    need a bit moe info for an informed quote. post-ban model?
    0
  • hdrulz99
    The Colt upper is pre-ban - the lower is post-ban.

    quote:Originally posted by ohioghog
    need a bit moe info for an informed quote. post-ban model?
    0
  • hdrulz99
    If I was to sell the upper and lower separately, how much should I ask for each?

    quote:Originally posted by gunner8479
    Welcome to the forum, your mixed part AR-15 is not worth as much as an AR-15 with matching parts......probably between $400.00 to $600.00 depending on condition.....you'll probably get more for it if you sell the upper and lower separately.

    Remember, this is only my opinion......[:)]

    gunner8479
    0
  • keywest
    I might stand to be corrected BUT,I don't think you should have a pre-ban upper on a post-ban lower.If I am right,it's worth about FIVE YEARS!





    IT'S BETTER TO BE JUDGED BY 12, THAN CARRIED BY 6!
    0
  • hdrulz99
    If you are right - then I need to have a SERIOUS TALK with my local gun shop owner...


    quote:Originally posted by keywest
    I might stand to be corrected BUT,I don't think you should have a pre-ban upper on a post-ban lower.If I am right,it's worth about FIVE YEARS!





    IT'S BETTER TO BE JUDGED BY 12, THAN CARRIED BY 6!
    0
  • William81
    If your AR Clone is as you described, it is not a legal firearm and a real problem for you. Does it have a Bayo lug or flash supressor on it? I would check it out quckly and if it is as you say, disassemble it and sell the parts or build two legal ones.

    Guns only have two enemies: Rust and Liberals....
    0
  • hdrulz99
    How do I tell the difference between a muzzle break and a flash suppressor. My upper definitely doesn't have a bayo lug.
    0
  • keywest
    Hello again,post -ban barrels do not have anything on the muzzle,pre-ban barrels have a slotted type fixture on the end.I hope this helps!





    IT'S BETTER TO BE JUDGED BY 12,THAN CARRIED BY 6!
    0
  • William81
    Check out Auction 12235918 on Gunbroker. There is a good picture of a Preban AR with a flash suppressor. You may just have an aftermarket
    muzzle break that someone added....

    Guns only have two enemies: Rust and Liberals....
    0
  • mark christian
    Take a close look at whatever "device" is attached to the muzzel of the rifle. Does it unscrew or is it permanently attached-- either by welding or pinning? Chance are excellent that if you cannot unscrew the muzzel device it is a brake and not a flash hidder and the upper is POST-BAN. These mixed parts rifles are just shooters and have no value above the sum total of their parts and if you are thinking about purchasing this rifle from the gun shop I'd suggest that you look into buying a complete rifle from a single manufacturer (Colt/Colt or DMPS/DPMS) rather than a mix-master. Mixed parts rifles are fine if you are building a match rifle and choosing only the finest components which are available, but this does not appear to be the case with your rifle.

    Mark T. Christian
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?