SAR 1 Trigger Slap

bill2740

September 07, 2003 17:01

I just bought a SAR 1 from J&G Sales (imported by Century).
When fired, the rifle has a bad trigger slap (kickback).
Causes pain and discomfort to my trigger finger. I emailed J&G,
but got no response. What can I buy or modify a part(s) to solve
the problem??
Thank you much,

Bill

0

• 

  hunter223

  September 07, 2003 21:07

  Mine does the exact same thing. If you figure something out i would appriciate if you could send me an email letting me know. Thanks[:)]

  0
• 

  mag

  September 08, 2003 04:01

  AK47.net

  0
• 

  drobs

  September 08, 2003 07:32

  Check out:
  
  http://linx310.nothingbutguns.com/slapfix.htm
  
  Also:
  
  http://www.gunsnet.net/forums/showthread.php?s=&threadid=129838&highlight=trigger+slap
  
  http://www.gunsnet.net/forums/showthread.php?s=&threadid=132985&highlight=trigger+slap
  
  This is pretty good:
  http://www.gunsnet.net/forums/showthread.php?s=&threadid=128287&highlight=trigger+slap
  
  
  
  
  
  
  
  
  Regards,
  

  0
• 

  kingjoey

  September 08, 2003 09:43

  Some of the Century triggergroups do that, mine did until it broke in, now its fine. I seem the recall the FSE ones being preferred.
  
  Love them Beavers
  
  
  SUPPORT THE I.N.S. , THE COUNTRY THEY SAVE COULD BE YOUR OWN

  0
• 

  dotcom_guy30

  September 09, 2003 09:52

  dont plan on getting a response from the wholeseller unless you are an ffl holder in you got it in your local gunshop you must go through them to correct this

  0
• 

  bill2740

  September 10, 2003 12:54

  I am going to remove the trigger and disconnecter and grind the back of the disconnecter. Can I push the Shepards hook down to remove
  the trigger pin? OR, buy a single hook TCG from Tapco for $6.99.
  The Century (US made) TCG is poor quality.
  
  
  Bill

  0
• 

  drobs

  September 10, 2003 13:00

  Bill I'd go ask that on that other board. My SN 03 Sar1 doesn't have that problem yet.
  
  This might help though.
  
  http://linx310.nothingbutguns.com/fcgremoval.htm
  
  Regards,
  

  0
• 

  kingjoey

  September 10, 2003 16:44

  Bill, put a few hundred rounds through it and it'll probably straighten up. I wouldn't grind on the control group, it will affect reliablity because the hammer may not catch right causing the hammer to follow the bolt as it closes which can cause a failure to fire, fire out of battery[B)], or full-auto bursts. Also, if your rifle is ever under legal scrutiny for any reason you might not want the file marks all over the trigger group[;)] If it doesn't clear up after a couple hundred rounds then check with Tapco or CDNN, the have replacement groups really cheap.
  
  Love them Beavers
  
  
  SUPPORT THE I.N.S. , THE COUNTRY THEY SAVE COULD BE YOUR OWN

  0

Please sign in to leave a comment.