Skip to main content
Help Center Community Shop

Scope mounting ?????

Comments

3 comments

  • MIKE WISKEY
    SHOULD WORK OK IF THEY ARE THE SAME HEIGHT AND HOLE SPACING IS THE SAME.
    0
  • Guns & Glass
    Perhaps..............Perhaps not.

    Not all base tops are exactly the same height from the bore line,...when installed. Yet the scope rings are center lined.

    You will lose some windage adjustment.

    If front end is raise 5/8" as you wrote, you will lose about 62.5" of elevation, or in effect your shooting 62.5" low @ 100 yards from Bore Center Line to Optical Line of Sight.

    These are 'paper' mathematical figures, however every gun & shooter shoots different for a varity of reasons.

    One bad thing about usind so much internal adjustments, is you can easily degrade the Optical Sight Picture w/o even knowing it.

    Some quality makers put "stops" internally to reduce, or even prevent that from happening.


    Happy Bullet Holes!
    0
  • COONASS
    But Jeff it moved the scope back 5/8" not up....... when I bore sighted after it was only 9" low, compared to being dead on before taking the scope off and doing this.......... I also sent you a e-mail.......... Thanks for the help........

    Our good friend Ronnie is under the weather with his meds....... Lets all send him a prayer and / or e-mail of encouragement...

    Thanks
    Jamie [^]

    We Live in a World of Give And Take, But A Lot Of People Won't Give What it Takes.

    " There's plenty of room for all God's creatures. Right next to the mashed potatoes."
    <')))><

    <')))><
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?