Skip to main content
Help Center Community Shop

338-06

Comments

3 comments

  • snickers
    Can anyone share a couple of pet loads for a 338-06.
    I am looking for a load for a 210 gr. Nosler Partition in particular.

    MONEY TALKS mine says good-bye
    0
  • nononsense
    snickers,

    I haven't worked on my 338-06 for quite some time but I found some information at an interesting reloading site.

    www.reloadersnest.com

    Load 4687 in caliber .338-06

    Back

    LoadID 4687
    Bullet Nosler Partition
    BulletWeight 210 grs
    Powder IMR 4320
    PowderWeight 54 grs
    Primer Federal 210GM Match
    BrassMake Federal Prem N.
    BarrelLength 22 (inches)
    C.O.L (inches)
    Velocity 2600 fps
    Group (inches by 3 shot)
    SubmittedDate 12/31/2002 1:23:00 AM
    SubmittedBy jeffreyauton@hotmail.com
    Comment Excellent Elk and Bear load.

    Energy 3146 ft-lbs
    TKO 26364.58
    OGW 1163 lbs




    Note: Measured velocity is at current barrel length.

    Warning: Even this was a safe load in current weapon,
    ALWAYS start 5-10% lower and work yourself up to a safe
    max level in your weapon.
    ReloadersNest and the author takes no responsibility for
    any result using these loads.
    ***********************************************************

    Load 7961 in caliber .338-06

    Back

    LoadID 7961
    Bullet Nosler Partition
    BulletWeight 210 grs
    Powder IMR 4064
    PowderWeight 56 grs
    Primer CCI 200
    BrassMake Remington
    BarrelLength 24 (inches)
    C.O.L 3.175 (inches)
    Velocity 2800 fps
    Group (inches by 3 shot)
    SubmittedDate 7/21/2003 11:41:00 PM
    SubmittedBy Orda Selph
    Comment Extremely short throated rifle (35 Whelen brass)

    Energy 3648 ft-lbs
    TKO 28392.63
    OGW 1452 lbs




    Note: Measured velocity is at current barrel length.

    Warning: Even this was a safe load in current weapon,
    ALWAYS start 5-10% lower and work yourself up to a safe
    max level in your weapon.
    ReloadersNest and the author takes no responsibility for
    any result using these loads.

    www.reloadersnest.com
    ***********************************************************

    There is also some information listed in the Accurate Arms reloading guide using the 210 Nosler Partition. I just tried their website and they seem to be experiencing some problems or I would have copied and posted their information.

    www.accuratearms.com

    Best.
    0
  • aglore
    You might want to try working up loads with RL15. Start at 50 grains and it should max out at about 54 grains or so. Just watch for pressure signs. The max load should be right in the 2700 FPS area if you have a normal 24" barrel. Would probably only be about 2600 or so if you have a slow 24" barrel. The 210 Nosler should be the ultimate bullet for the 338-06 IMHO.

    AlleninAlaska
    Delta Firearms & Supplies
    http://canadianfirearmsexchange.com

    Buy firearms on the installment plan and Play while you Pay.

    aglore@gci.net
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?