Winchester ,351 Auto Loading Rifle Reloading Data?

rhull2222

August 03, 2003 16:35

Hello, anyone know where I can locate some reloading data for the Winchester .351 auto loading rifle? Just purchased an old Model 1907 rifle and would like to shoot it some!

thanks,



Reg

0

• 

  Hardrada55

  August 03, 2003 17:02

  I don't reload for the .351 but if I did I would rely on John Henwood's book "The Forgotten Winchesters, a History of the Models 05, 07 and 10 Self-Loading Rifles". Lots of reloading information. Mr. Henwood may have some copies left or you could probably get it through inter-library loan. Mr. Henwood's address is:
  John Henwood
  819 Linda Mar Blvd
  Pacifica, CA 94044-3450

  0
• 

  buckdeer

  August 03, 2003 17:40

  you may know this already but, you can make 351's from 357 mag. brass if you need to it requires lathe turning the casehead down to the correct size

  0
• 

  Iconoclast

  August 03, 2003 18:14

  rhull, welcome to the zoo! If you wish to share your eml addy, I have three .jpg files of loads scanned from various references for this caliber. You can reach me at tcg25@hotmail.com

  0
• 

  Sunray

  August 03, 2003 19:45

  Yep. Max case length: 1.380. Trim to: 1.376. Max. OAL: 1.90. Small rifle primer. Cast diameter, .352. Jacketed diameter, .351. Use 348 cal gas checks. Best acuracy with IMR4227.
  180 grain jacketed
  Unique 10.0 to 11.0
  2400 17.0 to 19.0
  IMR4227 17.0 to 19.5(compressed)
  
  171 grain cast with gas check
  Unique 12.0 to 12.5
  2400 17.0 to 19.0(compressed)
  IMR4227 17.0 to 19.5(compressed)

  0
• 

  rhull2222

  August 06, 2003 06:49

  Thanks much for the info - actually, I know very little about this rifle. All this info will be very helpful!
  
  Reg
  
  Reg

  0

Please sign in to leave a comment.