Acquired old guns...What next.....
Hi![:D] I recently aquired 3 old guns of my Great-Grandfather's. First, I will tell everyone what I was fortunate to have been given, then my question. I recieved a Winchester 1894 32-40 Rifle SN 170XXX, with the exception of the Tang sight all is original from the factory. I also got a Winchester 1897 12 Ga. shotgun SN E 438XXX. I also got a revolver, no idea of the caliber. The only markings on the gun is that it says "old Hickory" on the barrel and when I removed the grip I located the SN 1365. If you have any info to help me with the revolver I would appreciate it. My question, these guns had set in a closet for many many years, they have some rust and brown coloration, what is the best way to clean this up. I assume that I shouldn't use a wire brush to get the rust off....so what should I do. Also if anyone want's to add any thoughts on value or when they would have been produced, please do.
Thanks in advance,
CJ
Thanks in advance,
CJ
0
-
What I would do is rub some light oil on the affected parts, let sit for a few hours and then GENTLY rub with #0000 steel wool; you'll get a feel as to how much effort is required . If the wood is oily, grimy, then use a moist rag and detergent to wipe it off. Be gentle and I think you will be rewarded with improved appearance with no damage to the guns. Emery
"Well done is better than well said"
Ben Franklin0 -
Have a listing in my references for "Old Hickory". It's a "Suicide Special" made by Hopkins & Allen of Norwich Connecticut, circa late 19th century.
Without photos, it's almost impossible to give you any kind of definitive assessment of your guns, regarding value or history.0 -
Restoration of Old Guns is up my ally, use G96 GunTreatment and Brown bag paper. The paper has the lightest grit possible, and adds luster to the finish, if there is pitting, you have major problems and will have to attack from a different angel. G96 is the Absolute BEST product I have found for Guns, (old or new), (metal or wood0 (internal or external), Don't let Momma find out what it does for Wood. And it does not attract dust like WD-40. It will not bleed carbon from the metal to the wood - Like WD-40, it does not crust up or varnish like -WD-40 over a period of time. And it smells better than WD-40.
The Winchester 32-40 is a fine piece and if in good condition=will bring a premium. Old Hickory? New one on me, If I get time, I will research that and get back. (what caliber is it, how many shots, does it double lock, is the cylinder fluted, nickle or blue, barrel length, handle material, ?????????? Patent date, top break, swingout, or Pin through the cylinder?
Ronnie G. Perkins0 -
Restoration of Old Guns is up my ally, use G96 GunTreatment and Brown bag paper. The paper has the lightest grit possible, and adds luster to the finish, if there is pitting, you have major problems and will have to attack from a different angel. G96 is the Absolute BEST product I have found for Guns, (old or new), (metal or wood0 (internal or external), Don't let Momma find out what it does for Wood. And it does not attract dust like WD-40. It will not bleed carbon from the metal to the wood - Like WD-40, it does not crust up or varnish like -WD-40 over a period of time. And it smells better than WD-40.
The Winchester 32-40 is a fine piece and if in good condition=will bring a premium. Old Hickory? New one on me, If I get time, I will research that and get back. (what caliber is it, how many shots, does it double lock, is the cylinder fluted, nickle or blue, barrel length, handle material, ?????????? Patent date, top break, swingout, or Pin through the cylinder?
Ronnie G. Perkins0 -
the 'old hickory' name is found on revolvers manufactured by iver johnson's arms & cycle works and harrington & richardson arms co. in both single and double action.if you can post a picture i should be able to identify which of the three manufacturer made you revolver
b.goforth0 -
Rufe....we who originally hail from the Thames Valley (Norwich) Area, prefer to refer to the products of our historic arms manufacturers as low-priced, or inexpensive, personal defensive arms....not as "suicide specials". [;)] 0
Please sign in to leave a comment.
Comments
6 comments