Base/rings for Dan Wesson 22
Where can I find a set of rings and base or just rings that will attach to a Dan Wesson .22 revolver. It is the large frame gun with a vented rib barrel. Is there anything that will mount directly to the rib to avoid 'smithing?
Politicians are like diapers, every so often you need to change them, for obvious reasons.
Politicians are like diapers, every so often you need to change them, for obvious reasons.
0
-
Dialing in that "coon buster"?[:D]
Ted Kennedy's breath has killed more people than my car.0 -
You'll find about 2 differnt "sets". Leuplod made a ring that clams down to the rib, you can find them on auction sites. Then theres the b-square you can find on auction sites too for about $60. try cheaperthandirt and they have them for about $40, and it works great with my 357, just don't go cheap on a scope. You could also send the shroud to DW, and they'll drill and tap it for you, or sell you one already tapped. 0 -
ISP, yep! Got a Burris 2x from GHD that desperatly needs to go on this gun!
1022man, thanks for the info, I will check with CTD.
Politicians are like diapers, every so often you need to change them, for obvious reasons.0
Please sign in to leave a comment.
Comments
3 comments