Skip to main content
Help Center Community Shop

1895 and 1896 Krag

Comments

4 comments

  • gruntled
    All the Krags should have the selector switch but like mine many had it removed & replaced with a side mounted peep sight. Not a major problem since it reqired no change to the gun & can be easily changed back if you can get the parts.

    Actually now that I look at it there may have been an alteration.
    I believe there was a hole drilled & tapped into the left side
    magazine cover to secure the sight mount.
    0
  • rufe-snow
    Regarding your question about reference books on the U. S. Military Krag Rifle. The best one I know of is "Krag Rifles" by William S. Brophy, unfortunately it's now out of print. It would probably cost you $150 to $250 for a used copy!
    0
  • Wagion
    Any one know anything about the winchester?


    If force ain't work'n... Your not use'n nough of it
    0
  • Iroquois Scout
    I assume that we are talking about rifles as you don't give any barrel lengths. First, the Winchester model 1895, the .30-40 Krag chambering is the most common of those found in the model 1895. Standard barrel length is 28 inches. To get $850 for a common, reblued model 1895 the condition of the bore had better be excellent plus. Try offering $650 and work up from there.
    On the Krag, the switch that you are talking about is called the Magazine Cutoff and yes, there should be one. Again, you are correct, the rear of the bolt should have the safty. It looks just like the one on the Mauser rifle and works in just the same way. To tell if you have an original 1896 bolt, look at the underside of the bolt handle. There should be a short flat milled where the lug meets the round part of the handle. On the 1898 bolt this flat is about twice as long. The proper rear sight has a smooth tangent curve base marked on the left side 3 to 6 for 300 to 600 yards. The standing leaf is marked from 7 to 18 for 700 to 1800 yards. There are two modles of this sight, the first model has a small headed binding screw on the elevation slide, while the second model has a large headed binding screw. Rifle rear sights are not marked as to the weapon that they go to, but, carbine sights are marked with the letter "C" on both the base and the leaf. The wood handguard for the rifle should be flat, with no "hump" at the forward end.
    Hope that this is of some help to you. Scout
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?