Winchester modle 24 SXS

ranger37

April 13, 2003 11:39

Hi all........

you have all bin so helpfull on all my questions so I thought I would ask another one...

I have a project in the works I`m restoring a model 24 sxs winchester shotgun, and the only part I can`t find is the butt stock bolt, I`ve tried gunparts and they don`t have any, I was woundering if any body new of any other places......Thanks...[:D]

DO RIGHT GUNSMITH, INC.

0

• 

  taperloc

  April 13, 2003 11:57

  ranger37,
  I've got a model 24, 20 ga. It looks to me that it wouldn't be much of a job to make the stock bolt. It's Palm Sunday and were having guess over, so I can't do it today, but I'll pull the plate off mine, pull the bolt, measure it, check the thread size and give you the all the dimensions. I'll get to it as soon as I can.
  
  Taperloc.

  0
• 

  ranger37

  April 13, 2003 14:45

  Hi Taperloc....and welcome..[:D]
  
  Thankyou for your help on this.......I realy appreciate it....[8D]
  
  DO RIGHT GUNSMITH, INC.

  0
• 

  taperloc

  April 14, 2003 19:25

  Hi. Ranger,
  Here's the specs. on that stock bolt.
  Bolt:
  Overall length = 4.65
  Head Dia. = .560
  Head thickness = .207
  Slot = .091 wide
  .098 deep
  Shank Dia. = .245
  Thread length = .798
  24 threads per inch.
  
  Split washer
  Outside Dia. = .847
  Thickness = .051
  Center hole = .270
  
  This split washer looks as if they took a piece of .051 spring steel and stamped a bend on either side of the split, one side up and the other side down. It's not very pretty.
  Hope this helps.
  Taperloc

  0
• 

  ranger37

  April 14, 2003 19:40

  Hi Taperloc....
  
  The dimentions were perfect....I thankyou again for your help.....[8D]
  
  DO RIGHT GUNSMITH, INC.

  0

Please sign in to leave a comment.