sight instalation on a cut 12ga

cjkusnierz

March 02, 2003 20:28

i am wondering if i can dril a hole in the end of the barrel and tap it the same threads as a factory beed. or do i have to not dril all the way threw[?] [:p]

0

• 

  Python

  March 02, 2003 20:44

  If the barrel has a rib on the top. no you don't have to drill through. If not, unless you have a good milling machine, depth guages, and the proper taps, yes you will. Careful placement of the bead and deburring of the bore will made for a near original appearence, except of course, for the shorter barrel.

  0
• 

  cjkusnierz

  March 02, 2003 20:55

  quote:Originally posted by cjkusnierz
  i am wondering if i can dril a hole in the end of the barrel and tap it the same threads as a factory beed. or do i have to not dril all the way threw[?] [:p]
  ther is no rib and i do not have a mill or press so if i debur the inside i shuld be allright then! thanks[:p]

  0
• 

  Python

  March 02, 2003 22:13

  Absolutely. If you drill slowly and carefully, deburring may not be nessesary. Deburring is easy, burrs can be knocked off with the edge of a flat screw driver blade and polished with crocus cloth on a wooden dowel.

  0

Please sign in to leave a comment.