Best Bore Cleaner?

primertel

February 28, 2003 19:06

Any ideas on what is the best bore cleaner for copper fouling?

0

• 

  maggiethecat

  February 28, 2003 19:18

  the best hands down? BLUE WONDER Its the only thing worth using. you'll never wnat anything else
  
  SGT USMC
  
  The greatest happiness is to see your enemy scattered before you, to see his village in ashes, and to gather to your bed his wives and daughters.-Genghis Khan 1226

  0
• 

  primertel

  February 28, 2003 19:33

  Where can I find Blue Wonder

  0
• 

  trsmith5

  February 28, 2003 19:43

  Maggie's right hands down
  BLUE WONDER.......... check out their website
  www.novumsolutions.com any good gun store should be able to get it for you. If not, e-mail me and I'll send ya a tube. It runs about $10 a tube and it goes a long way

  0
• 

  sundowner

  February 28, 2003 19:44

  Midway USA: http://www.midwayusa.com/rewriteaproduct/444070
  
  Brownells: http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1597
  
  You just need the cleaner, not the whole blueing kit.
  
  Blue Wonder's home page is at http://www.novumsolutions.com/GunBlue.html
  
  
  ". . . let me forget about today until tomorrow"

  0
• 

  thecowboyace

  February 28, 2003 20:42

  quote:Originally posted by primertel
  Any ideas on what is the best bore cleaner for copper fouling?
  
  Somewhere in a SKS forum talked about building an electrical gadget by running an aluminum rod, several sizes smaller than the bore of your gun, plugging each end w/ a rubber grommet, using a mixture of ammonia, water, and danged can't remember the formula, and hooking each end of the alum rod to each end of a 2 C/D cell flashlite and leaving it hooked up for about 40 min. Reverse electrolysis for the good.
  
  
  Goat

  0
• 

  Iroquois Scout

  March 01, 2003 06:12

  Ammonia, distilled water and hydrogen peroxide, all in equal parts. Keep in a light proof container. You don't even really need the aluminum rod as this is the old bore cleaner used by match shooters back in the 1950's before we had all the different bore cleaners that we have today. Most of today's bore cleaners still use ammonia as a base. One other thing, don't get any of this mixture on the blueing or stock finish and oil the bore when you are finished cleaning.

  0
• 

  trsmith5

  March 01, 2003 06:32

  Hey Cowboy. I believe the missing ingredient is baking soda.
  You can do basically the same thing without the batteries and ammonia, which by the way produces flammable fumes. Just use the foil rod, 1-quart of HOT water and 1-tbsp of baking soda. This is the Electrolytic method, which works by means of ion exchange. It causes a chemical reaction between the metals.
  Ketchup and lemon juice as well as non-gel toothpaste are also very corrosive to copper. If you clean copper items with any of these be sure to wash it in warm soapy water afterwards to prevent etching.
  
  Primertel: be safe and get some "BLUE WONDER"

  0
• 

  mballai

  March 01, 2003 08:54

  I like Blue Wonder, but am very fond of MPro 7. The reason is that it has no smell. I really don't care much one way or the other about odors of gun cleaners, but the lady of the house does and most of the cleaners and lubricants use petroleum distalates that aren't the most appealing to the nose.
  
  Three Precious Metals: Gold, silver and lead

  0
• 

  pack rat633

  March 01, 2003 13:22

  SWEET'S 7.62 Bore Solvent is what we use around here. Quick and does a fantastic job, www.midwayusa.com has it all the time, bout $7.50 a btl. If your bore is way nasty, try JB Bore Cleaner paste, really shines bore up. Have fun!!
  
  SEMPER FI MAC, SEMPER FI

  0
• 

  bullhauler

  March 01, 2003 20:00

  I use a mixture of 1 part gum-out carb cleaner to 2 parts marvel mystery oil. If its really dirty or if it fouls badly then use the jb bore paste.
  
  welcome to America...now speak english or get the ****out

  0

Please sign in to leave a comment.