Aluminum Frames Receiver Paint????

22WRF

February 04, 2003 13:45

What is a good paint to refinish with.
I was thinking of some Merc outboard paint
How about a epoxy paint?


In Memory of Columbia
SOLD MY COW SO I DON'T NEED YOUR BULL [;)]

0

• 

  kingjoey

  February 04, 2003 13:50

  I use epoxy and bake it at 150 degrees for 2 hours, 200-250 degrees for 8 hours. Let it cool overnight and its ready for use the following morning. You might experiment with some different brands too, the results will vary. I had some that I used to bake at 350 degrees and it was hard as nails.

  0
• 

  Rembrandt

  February 04, 2003 14:38

  ....Brownells has just what you need...
  
  http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1117

  0
• 

  JIM STARK

  February 05, 2003 02:15

  I use black automotive laquer...matte or gloss.... prep by bead blasting, and or polishing..put on a light coat..bake in mama's oven for 20 min.@ 350 F Additional coats may be added to suit the painter....bake after each coat....

  0

Please sign in to leave a comment.