Skip to main content
Help Center Community Shop

info request on ithaca hammerless double

Comments

1 comment

  • Bert H.
    Hello Chad...

    Your old Ithaca was made circa 1910 (I don't have access to my serial number listing at the moment, so I might be off by a few years). The chambers on that gun are not 2-3/4", but are most likley 2-5/8". The reason that a 2-3/4" shell will drop right in, is because it is not 2-3/4" long until it is fired. I strongly recommend against shooting it with ANY modern made 12 gauge ammo. Modern ammo creates a much higher chamber pressure than the old stuff did, and if you shoot 2-3/4" shells in those short chambers, it will push the pressure even higher (and kick the snot right out of you at a bare minimum), and it could bluge or split the barrel right at the forcing cone. There is nothing wrong with the way the firing pins are working in your gun. At the exact moment when you open the action to eject the spent shells, it recocks the hammers, which allows the firing pins to move freely.



    Bert H.

    Real Men use a SINGLE-SHOT!
    0

Please sign in to leave a comment.

Recent Activity