SW sigma series

dabot

November 24, 2004 08:29

is it possible to reduce the trigger pull on the sigma series? Out of the box it is 10# and I'm looking to get it around 5.5#

Comments

4 comments

Jake_S-83

November 24, 2004 09:56
im not sure. i think these things are prettty glock-like inside, so you would have to replace the connector with one that has a different angle. somebody please correct me if im wrong. ive never seen spare parts advertised for this gun
0
ATF

November 24, 2004 13:32
Got this from the S&W Forum.
++++++++++++++++++++++++++++++++++++++++++

This tip is to lighten the trigger pull on a Sigma.
+++++++++++++++++++++++++++++++++++++++++++++++++++

Here's a good tip for the trigger pull
soak the slide in alcohol over nite
then (no need to disassemble) work the firing pin back and forth or you can dissemble it and lightly very very lightly file the channel where the fire pin is engaged by the trigger mechanism
then use 1 drop of slick 50
my trigger is now much smoother and easier to pull.
0
donut77donut

November 24, 2004 14:48
Wolff makes a lighter spring.
0
dabot

November 26, 2004 11:54
I solved the problem. Took it down to the local dealer and traded it on a Glock. Problem solved
0

Please sign in to leave a comment.