Skip to main content
Live chat will not be available on Monday, September 7th in observance of Labor day. We will reply to your request as soon as possible.
Help Center Community Shop

reloader for newbie

dkosto99
I am interested in low cost (less than $100) rifle cartridge reloader. Never done it before. What would you suggest?
Thanks,
Dan
0

Comments

10 comments

Date Votes
  • rldowns3
    If you are wanting to get started in reloading (the proper way) for less than $100 you might be in for a shock. [:D] You will need a press, dies, powder measure, priming tool and a few other odds and end tools as well as supplies to get started.


    But if you are willing to fork out a little more cash then check out RCBS at www.rcbs.com

    They have a complete reloading kit (minus the dies and shell holders). It has in it the Rock Chucker Supreme Press, 5-0-5 Reloading Scale, Uniflow Powder Measure, Speer Reloading Manual #13, Hand Priming tool, Hex Key Set, Case Loading Block, Case Lube Kit, Powder Funnel and Deburring Tool.

    I think it's around $400.

    kerrytraitor.jpgof our country.
    0
  • donut77donut
    I agree to spend more and look at RCBS, but you could get a Lee Anniversary kit for less than $100
    0
  • rldowns3
    The Lee kit is $110 + shipping, but the stuff that comes with it is kinda el-cheapo stuff.

    kerrytraitor.jpgof our country.
    0
  • Tailgunner1954
    Starting out, I recogmend looking at the RCBS kit over the LEE one also (sorry but I prefer a lifetime "no hassel" warrenty like RCBS and Dillon has over a limited 5yr like LEE offers).
    One thing to consider is USED quality equipment. Press, scale hand priming tool, 6" dial caliper & dies will get you started, add the other "goodies" later or get creative and make your own (I'm still using a hardware store funnel, homemade loading blocks, pocket cleaners, case and OAL gauges etc. that came with my first (used) press 30yrs ago. There working fine and I see no reason to replace them yet). Powder measures and tumblers can be bought "down the road" to increase your production rates.
    The very first thing to purchase is 1-2 quality manuals like Nosler, Hornady, Hodgdon, Lyman or Sierra offer, if you purchase the RCBS kit it will include the Speer book.

    Whittemore
    Some guys like a mag full of lead, I still prefer one round to the head.
    0
  • jonesj8
    I bought a Lee Anniversary Set from Cabelas for less than 100 bucks two years ago. Have reloaded thousands of rounds, in about ten calibers, with it and have had no problems. Save the extra cash for more components and have fun shooting and reloading.
    0
  • r7
    I will be the first to say Dillon isn't cheap if you plan to load several calibers, but it is the only way to go!
    0
  • badwrench
    I only reload .357 Magnum and love my Lee Loader. Way less than $100.

    Chrome don't get you home.
    0
  • dkosto99
    Thanks for responses.
    I was looking at the Lee anniversary kit at Cabelas for under $70.
    Set of dies is $20.
    Waste of time and money?
    Email me if the thread gets too long.
    Thanks,
    Dan
    0
  • Tailgunner1954
    Not a total waste, but there are some important parts that are of questionable reliability (like the scale). A lot of people are happy with the LEE setup however. I guess it depends on how fussy you are about the quality of your reloads.

    Whittemore
    Some guys like a mag full of lead, I still prefer one round to the head.
    0
  • chuck
    Years ago I bought USED stuff, Look in gun shop's, run an add in the paper. You could go to gun show's but you wont save much their if any.
    0

Please sign in to leave a comment.

Recent Activity