Mounting Stuff

djm1369

November 09, 2004 18:16

thanks to ur guys help i ordered a leupold vx1 3-9x40 from natchez. as u know i have a remington .30 06 semi auto. i believe it is a model 7400 although i am not sure what time of mounting things will i need? 1 or 2 base ? rings? thanks again

0

• 

  djm1369

  November 10, 2004 06:06

  anyone?

  0
• 

  1KYDSTR

  November 10, 2004 06:25

  I would go to www.midwayusa.com and check their selection. They also seem to have a good system of determining your mounting/scope options for most types of commecially available firearms. Either 1 or 2 piece bases should work fine...it just depends upon yopur preferences. I normally go with a 1 piece Leupold base, but thats just me.
  
  "When I cease learning...I'm dead"(Me)
  "When I was 14 I used to marvel at how ignorant my old man was...by the time I was 21 I was truelly amazed at how much the old bugger had learned in the intervening 7 years!" Samuel Clemens
  "History is written by winners"(Patton)
  "You get a lot farther with a kind word and a gun than you do with a kind word alone!"(Al Capone)
  "There is nothing lower than the human race...except the French" (Samuel Clemens)

  0
• 

  djm1369

  November 10, 2004 08:32

  thanks for your help would i need rings along with the base? also midwayusa is sold out of what i want...any other sites you recommend? thanks

  0
• 

  ern98

  November 10, 2004 09:00

  Brownells has an online site, do a search for it.

  0
• 

  mrbruce

  November 10, 2004 10:11

  A weaver 1 piece #62 base, and a set of weaver medium rings will take care of your scope mounting job.
  Clean the screw hole's out real good with a solvent, and lightly coat the base mount screws only with a bit of 242 Locktite.
  Cinch them down tight and your finished.......
  Do not locktite the ring screws. Good luck.
  
  mrbruce
  
  
  
  Gun control is hitting what your aiming at.

  0

Please sign in to leave a comment.