Tear Gas Batons
I need some information on a Federal Laboratories Inc. Model 303 Billy Tear Gas Baton I was offered one tonight and don't know what they are worth or the legallity of ownership. I have looked around and can't find any information about them. It is black, roughly 9-10" long and unscrew at about 1/3rd of the way down. There is a knob in the middle of the butt end that you pull back to cock. It has a button trigger with a sliding safety catch. The chamber is bigger than a 12 gauge So guys anybody know anything?
"When you choose the lesser of two evils, always remember that it is still an evil."
- Max Lerner
"When you choose the lesser of two evils, always remember that it is still an evil."
- Max Lerner
0
-
Have had a number of posts regarding these tear gas launchers/dispensers over time. Make sure it can't chamber a conventional 12 gauge shell. They were made in many different calibers & gauges. Long as it can't chamber a standard cartridge or shell, my 2 cents is that your OK. 
0 -
contact these guys
http://www.collectorsfirearms.com/
they have had them in the past ,and they are on the atf curio and relics list SECTION IV: National Firearms Act Weapons Classified As Curios Or Relics Under 18 U.S.C. Chapter 44
http://www.atf.gov/firearms/curios/sec4.htm
if you find a price please post it ,i know here one is sitting like new in the box ,with original papers0 -
It is not a 12 gauge it is a 27mm or 28mm a 12 ga round will slide all the way through it and out the front
"When you choose the lesser of two evils, always remember that it is still an evil."
- Max Lerner0
Please sign in to leave a comment.
Comments
3 comments