Skip to main content
Live chat will not be available on Monday, September 7th in observance of Labor day. We will reply to your request as soon as possible.
Help Center Community Shop

Help identify ideal tru line/ 310 dies

mastershooter357
Can anyone tell me what these ideal dies fit. Anyone got a old lyman/ideal chart that identifies dies by number?Rifle seating die #231 sizind die # is either35 or 95{pistol) Seating die pistol #42 and 95. thanks in advance you guy have never failed to know the answers

mastershooter357
0

Comments

7 comments

Date Votes
  • mazo kid
    Are you sure the # is 231? My reference book doesn't have numbers that high. If the number should be 123, then it is for the 30-06. The number 95 is for the 38/357 and the number 42 is for the 38-40 according to my Ideal Hand Book #38. Emery

    "Well done is better than well said"
    Ben Franklin
    0
  • perry shooter
    Hello I concur with MAZO KID 164 is thehighest # listed in all of my ideal quick reference tables all other info is as he stated
    0
  • blackpowdermax
    mastershooter.....the 231 on your seating screw is the seater plug #....it indicates the bullet shape that it was designed to seat. In this case, it was made to seat a 110 grain flat point cast bullet for the 25-35 Winchester or 25-36 Marlin. Mold # is 257231. Another example would be the 175 grain cast bullet (mold # 321232) for the 32-40. Seater screw # is 232. The 1st 3 numbers on the mold indicate the as cast diameter, the last three the bullet shape.

    Hope this helps.....

    max

    load the old ones with the old tools.....
    0
  • mastershooter357
    thanks all you guys. that fixes me up for now. where can i get a list of these numbers.

    mastershooter357
    0
  • perry shooter
    Do you have a FAX # I can make a list. Or look here and other web sites for Ideal catalog # 30 - #35 all have them I did not look at my earlier and later ones. Karl the PERRY SHOOTER
    0
  • blackpowdermax
    mastershooter.....here is a link that will get you started.....keep in mind that there were lots of transition periods involving the old Ideal tools and the 310 tools and you sometimes have to combine a little. Go to the "Reference" tab for the old and new.....

    http://www3.telus.net/310outpost/index.htm

    max

    load the old ones with the old tools.....
    0
  • mastershooter357
    Thanks one and all. No fax but ill try for the old manual. The web link is the bomb. Hope this info has helped others as well. see ya bye

    mastershooter357
    0

Please sign in to leave a comment.

Recent Activity