Skip to main content
Help Center Community Shop

ak muzzle break install

sr338
I just bought a pin on muzzle break for my romanian ak. For some reason, the front sight pins just WILL NOT come out. Any help would be awesome. Thanks guys.

john kerry, out to prove he's got nothing to prove.
0

Comments

4 comments

Date Votes
  • hatchettman
    i may have this backwards, but as you look down the barrel towards the receiver, tap the sight pin from left to right, if not, try opposite.
    0
  • Muffinman
    It's a tapered pin, Smaller on one side. look at both sides and you can see the dia. and tell.
    0
  • Red223
    My view of pin on muzzle breaks is they suck.

    I pinned one on my WASR10, fired 20 rounds and the muzzle break was loose and wobbly. It had actually bent around the pin area giving it room to slop around.

    Nice for looks but wasn't practical.

    Could you tack-weld it on also? Might cure the problem.
    0
  • Muffinman
    quote:Originally posted by Red223
    My view of pin on muzzle breaks is they suck.

    I pinned one on my WASR10, fired 20 rounds and the muzzle break was loose and wobbly. It had actually bent around the pin area giving it room to slop around.

    Nice for looks but wasn't practical.

    Could you tack-weld it on also? Might cure the problem.



    Most end up tacking it. They get tiried of picking it up after it falls off a few times.
    0

Please sign in to leave a comment.

Recent Activity