Skip to main content
Help Center Community Shop

Colt Anaconda - need advice

Comments

3 comments

  • ATF
    A while back I ordered a S&W 686 for a customer.He called me and said there was something wrong with the gun.He said in order to hit anything he had to adjust the sight over so far he was afraid it was going to fall off.Luckily he had a range in his back yard.I adjusted the rear sight back to the middle and put 6 shots in the black at 50ft.It is not always the guns fault that the sights are adjusted way off center.[:)]

    Eagle_Guns.gif
    standard.jpg
    standard.jpg
    When a worm wants to relax,does he go fishing?

    ATF,Eagle Guns
    0
  • William81
    I have a Colt Anaconda with a serial # real close to the one you have described. Mine was manufactured in 1992. It is the most accurate revolver I have ever fired.

    Not sure what to tell you about the milled off center problem you mentioned. I have never heard about this, but that does not mean it did not occur....

    Guns only have two enemies: Rust and Liberals....
    0
  • cussedemgun
    coltnutz,

    My Anaconda has a serial # about 3K higher than yours & it is a fine shooter.

    A heavy bullet in a hand gun at magnum velocity generates torque that twists the gun (recoil occurs both back & sideways). The tighter you hold a gun, the less the gun is going to move before the bullet leaves the barrel.

    Chances are the person that sighted the gun was loose wristed. Still, an Anaconda is a sizable investment so ask if the dealer would object if your 'smith checked it prior to purchase. I would pay a few dollars to a 'smith for insurance & peace of mind.




    "all I really need to know I learned in kindergarten" Robert Fulghum


    anyone who says "nobody needs a full auto" has never been in front of a brown bear charge
    0

Please sign in to leave a comment.

Recent Activity