BT 99

vdegrazia

September 20, 2004 10:30

I need to shorted the stock on a Browning BT 99. My problem is, I see no apparent holes in the recoil pad to remove the attaching screws. What am I missing? Any help will be greatly appreciated.

Thanks Vic

0

• 

  MIKE WISKEY

  September 20, 2004 10:49

  THE HOLES ARE THERE. FIRST SPRAY THE BACK OF THE PAD WITH REM OIL OR SOMETHING SIMILAR, THEN START PROBING WITH A PHILLIPS SCREW DRIVER.

  0
• 

  BigBarn

  September 20, 2004 19:28

  Better yet, you can probably use your fingers to pull the pad toward the outside edge, at the top and the bottom, one at a time, and you will see the "slits" cut into the pad to let the screwdriver enter. Be sure to use a round shank screw driver, and put a little Vaseline on it so as not to tear the pad material.
  Let us know how it goes.
  
  Good luck,
  
  BigBarn[:o)]
  
  "Respect the land, and it will respect you"

  0

Please sign in to leave a comment.