Skip to main content
Help Center Community Shop

Bore lapping

Comments

4 comments

  • jc40
    Wheeler Engineering makes a bore lapping kit that I'm considering buying.Does anyone have experience with bore lapping and is there a real noticeable benefit on older rifles? As usual I rely on the good advice from members before wasting time and money.
    0
  • gotstolefrom
    I can't say I'm an 'Expert Bore Lapper', but I have done my share of polishing up older bores, or newly cut bores that are grabbing a lot of copper.

    Some folks will say it really doesn't apply to a 22. Many of the expert competition shooters will foul the bore after the piece has been cleaned, then not clean it for the match, or the season, and a couple say 'never' as long as it still groups well.

    Many folks follow the 'never' rule, but I have not been able to do it for more than a season. I do limit the barrel to a relatively light cleaning with just Hoppes while the rest of the gun gets a good cleaning before putting it away. So, you may have a great/medium/or poor bore that will shoot as good as it ever will after it 'fouls in'.
    0
  • JustC
    to effectively smooth out some chatter marks or releive some crevices,..clean the barrel extremely well. Then,..using a TIGHT patch coated in JB's bore paste or even Flitz metal polish, stroke the entire length of the bore (USING A BORE GUIDE) and work back and forth maybe 30 strokes. Completely clean out the residue with TIGHT PATCHES. Then treat the bore to a little KROIL. Dry patch, shoot it a few times,..repeat process maybe 3 Times at best, no more. It works.[;)]

    why chase the game when the bullet can get em from here?....
    Got Balistics?
    0
  • allechalley
    Thanks JC40, for asking and thank you JustC for outlining a practical
    "I've done it" response.
    0

Please sign in to leave a comment.

Recent Activity