Skip to main content
Help Center Community Shop

Guns 'n Glass

easygo6
Height of rings for flat top AR & 50MM:

I have a RRA Flat top and a Burris Black Diamond scope (30MM tube, 50mm Objective lens). What height rings do I need to clear the barrel? I tried to contact Warne and haven't gotten a response. The Warne rings are what I am interested in but I would use Badger, Leupold QRWs, or other suggested rings.

The designation med or high is sufficient. If you have the actual heigth in mm above the base (Picatinny Rail on receiver) that would be even better.

"They're in front of us, they're behind us, they're to our left and to our right...they can't get away now." Chesty Puller

SEMPER FI
0

Comments

3 comments

Date Votes
  • gskyhawk
    I used the high rings on my Bushy , there is about 15/16" between the buttom of the scope(main body ) and the top of the rail.
    0
  • easygo6
    Thanks gskyhawk.

    The high (15/16") rings gave the front bell of your scope adequate, but not excessive, clearance over the handguard or barrel.


    "They're in front of us, they're behind us, they're to our left and to our right...they can't get away now." Chesty Puller

    SEMPER FI
    0
  • gskyhawk
    I have a simons Aetec 3.8 x 12 x 44 on that rifle and it has a full 3/8" between the bottom of the bell and the top of the handguard , I would think your 50mm bell would have plenty of clearance.
    0

Please sign in to leave a comment.

Recent Activity