Skip to main content
Help Center Community Shop

Bullet tumble

Comments

3 comments

  • Bert H.
    Hello Bob,

    It appears the bullets are not spinning/stabilizing properly... which could be caused by a worn bore & rifling, or by undersized bullets. Have you checked the bullet diameter of that ammo with a micrometer? The bullet weight is definitely not the problem. I have a hard time believing that a Remington Model 700 barrel in 222 Rem Mag could be shot out badly enough that it causes the bullets to tumble. I have shot a few thousand rounds through my Rem M700 in 222 Rem Mag, and it still makes a ragged 3-shot hole at 100 yards (if I am having a good day that is[:)]). You could always have the bore scoped & slugged.

    Bert H.

    Real Men use a SINGLE-SHOT!
    0
  • king999
    Other possible sources of your problem:
    1.Bullets with bad BASES. Nose of bullet will conribute to better or worse accuracy. Bullets with bad bases or tipped in case will give tumblers.
    2. Under-powered loads will not give sufficient velocity and bullet will not spin fast enough.
    3. Excess freebore may allow bullet to tip before engaging rifling.
    Morty
    0
  • Salvage33
    Perhaps the bullets themselves might be assymetric and designed to tumble/keyhole?

    John

    The original point and click interface was made by Smith & Wesson
    0

Please sign in to leave a comment.

Recent Activity