Stock for Remington 600

loborojo338

August 23, 2004 14:49

I was wondering if there is anyone out there that could give me the distance between the floorplate screws center to center on a Remington 600. I came across an unfinished stock for sale that was just marked Remington.It is not for a 700 or an Enfield.It is much shorter(3/4 of an inch).The distance between the screw holes on the stock measure 7 3/8 inches.

0

• 

  Ray Boone

  August 23, 2004 22:53

  I'm not sure what spacing would be 7 3/8. I have an old 700 short action and the distance between the front & back screws is about 6 1/2". I think the long action is about 3/4 inch longer, so that may be what the stock is for.

  0
• 

  bem243

  August 24, 2004 12:26

  I just checked the floorplate screw spacing on my old Remington 600 chambered in .308 Win. and they are 5 5/8 inches center-to-center. It appears that your mystery stock is not for a 600.[?][?]
  
  In our schools, if we train the mind and not morals we will unleash criminals on society...Dr. Benjamin Rush

  0
• 

  cussedemgun

  August 24, 2004 12:51

  Mr. 338
  
  I have both Mod.700 long action & Mod. 721. The screw center to center dim. on both is approx. 7 3/8. You say this unfinished stock is shorter, is that length of pull as in youth model?
  
  I believe the floor plate screws on a Mod. 725 are also 7 3/8.
  
  hope this helps, Jim
  
  And WELCOME to the "ask the experts" forum
  
  "all I really need to know I learned in kindergarten" Robert Fulghum
  
  
  anyone who says "nobody needs a full auto" has never been in front of a brown bear charge

  0

Please sign in to leave a comment.