gunsmith help T/C trigger
need some advice about lighting a T/C contender trigger pull a.does anyone make spring kits ..wolf or anyother?B. if not, should the spring be thined on a sander or a little cut of the length?C. is there a stoning jig for T/C? cant seem to find one for custum power master jig.thanks for the help in advance cause i know you guys will come through for me.
mastershooter357
mastershooter357
0
-
With the existing (factory) spring you can set the pull to less than a pound ... use the allen head screw at the top front of the trigger (not the one in the face of the trigger pointing toward the back of the pistol.
If you mess with the springs (cutting, sanding, etc.) your inviting grief.
Bullseye used to make spring kits, and you see them up for auction now and again. Not sure about Wolfe, you can check their on-line catalog.
As for stoning jigs there are no commercial ones that I know of. I do mine free hand.
If you have any other questions, please feel free to use the email icon at the top of this reply to contact me.
If you only have time to do two things so-so, or one thing well ... do the one thing!0 -
What You need is a Copy of CHARLES STEPHENS book... [Thompson/Center,
Contender Pistol] How to Tune, Time, Load, and Shoot for Accuracy.
Published by Paladin Enterprises, Inc., P.O. Box 1307, Boulder, Colorado 80306 Phone (303) 443-7250..........
Captain Kirk, Tech Staff0 -
thanks for the advice.you guy are great.see ya bye
mastershooter3570
Please sign in to leave a comment.
Comments
3 comments