Skip to main content
Help Center Community Shop

Winchester 67 help

beltfed
Hello Ya'll
I have a winchester 67 single shot. I could not get the bolt out. I had to remove the barrel to get the bolt out. I think it was put togather wrong. I think I have it put togather right. But I can't figure out to get the bolt in. I pull the trigger and try to slide the bolt in but it will not slide in. Does any know what I am doing wrong.On the 67 you have to cock the gun by pulling the knob on the back of the bolt. I would be greatfull for any help. Thankyou Beltfed
0

Comments

5 comments

Date Votes
  • 260
    check to see if the cocking piece is in the correct position for reassembly.
    0
  • CountryGunsmith
    The barrel and receiver are one piece on the Winchester 67. What do you mean by 'remove the barrel?'



    Scrappy Doo sleeps with the fishes.
    0
  • taco413
    I just pulled the bolt outta mine, you have to squeeze the trigger all the way before you ever try taking the bolt out. As for putting it back in just the opposite. Least that's what I do to mine, also make sure the bolt is closed instead of open when trying to pull it out.

    Only The Strong Survive!!!!!
    0
  • MIKE WISKEY
    on the m-67 the tigger is pined to the stock, it has a long 'lobe' yhat interfaces with the sear (a tuning fork like piece) if the trigger 'lobe' dosn't go into the center of the 'tuning fork' you will noy br able to assemble to botl (also the bolt has to be uncocked).
    0
  • MIKE WISKEY
    maybe i should turn the lights on when typing!!
    0

Please sign in to leave a comment.

Recent Activity