Skip to main content
Help Center Community Shop

Ruger MKI .22 pistol, extractor R&R...

phxtravis
I have experienced some jams with my MKI, with the original extractor and spring, so I bought some new ones but can't figure out to to remove the olds one. Can anyone point me in the right direction?
thanks

Spring 1911-A1 Mil-Spec
FEG PJK-9HP(HiPower)
EAA Witness 10mm
Ruger MK1
Springfield M1903
Mossberg 500A
Marlin/Glenfield Mod 60
Mosin-Nagant M38
banner-big.jpg
0

Comments

6 comments

Date Votes
  • bobski
    insert gun in 5 gal tin of dupont 700x. light fuse. get away! man thats gonna be a hard one to explain with a keyboard. i'll let someone else field it! good luck![:D]

    former air operations officer SEAL Delivery Vehicle Team 2. former navy skeet team, navy rifle/pistol team member. co-owner skeetmaster tubes inc.. owner/operator professional shooting instruction.
    0
  • rufe-snow
    Use a small jewelers screwdriver to tension the plunger that functions the extractor. Puting tension on the plunger compresses the spring that is behind it. This SHOULD enable you to remove the extractor, ( if the bolt hasn't been cleaned, sometimes there full of crud and don't want to come out ).

    CAREFULLY release the pressure on the jewelers screwdriver. If your not carefull the plunger and spring will fly out, and you'll lose them[:(]

    luger_4.jpg
    0
  • hksrule
    The way to do it is simple as I myself own a mark II. I goes something like this...[V]

    WordBorn!!
    0
  • EVILDR235
    If i remember correctly,you will have to remove the cross pin that holds the firing pin in the bolt.If you don't the extractor plunger will not go back far enough to remove the extractor from the bolt.Be sure to replace the cross pin as it controls the movement of the firing pin.It the cross pin is not reinstalled,the firing pin will hit the edge of the barrel,leaving a dent in it.
    EvilDr235

    Two types of people drive old cars.Rich people because they want to and poor people because they have to.
    0
  • rufe-snow
    quote:Originally posted by EVILDR235
    If i remember correctly,you will have to remove the cross pin that holds the firing pin in the bolt.If you don't the extractor plunger will not go back far enough to remove the extractor from the bolt.Be sure to replace the cross pin as it controls the movement of the firing pin.It the cross pin is not reinstalled,the firing pin will hit the edge of the barrel,leaving a dent in it.
    EvilDr235

    Two types of people drive old cars.Rich people because they want to and poor people because they have to.



    EVILDR235 is right. In my previous post, I didn't say that the bolt had to be stripped, prior to removal of extractor assembly.

    luger_4.jpg
    0
  • phxtravis
    im ok, the extractor flew a safe distance of 2inches froms my eye[;)], thanks for the help.

    Spring 1911-A1 Mil-Spec
    FEG PJK-9HP(HiPower)
    EAA Witness 10mm
    Ruger MK1
    Springfield M1903
    Mossberg 500A
    Marlin/Glenfield Mod 60
    Mosin-Nagant M38
    banner-big.jpg
    0

Please sign in to leave a comment.

Recent Activity