stock wont fit

April 18, 2004 20:15

I have attempted to put a savage short action stock from a WSM onto my savage short action 223. It wont tighten up correctly. Am I doing something wrong or do I have the wrong stock. Any info would be great.

Thanks

Comments

4 comments

captkirk3@dslextreme.com

April 19, 2004 08:09
Sounds like You have the Wrong Stock....

Captain Kirk, Tech Staff
0
Red223

April 20, 2004 03:39
Ignore the moderator, use a hammer.[:p]

Seriously though I've bought some stocks that said they were a sure drop in item but required me to do some work with dremels and sand paper to get things properly shaped.

If you are not sure what you are doing nor do not wish to possibly ruin a stock....buy another one. Eventually you'll find one that will fit without work.
0
nononsense

April 20, 2004 04:45
johnny,

You need to contact Fred Moreo at this website:

http://www.varminthunters.com/sshooter/
SHARP SHOOTER SUPPLY
4970 Lehman Road
Delphos, Ohio 45833
419 695 3179
Email: mailto:sshooter@wcoil.com

Fred is very knowledgeable about all things Savage.

Best.
0
hoosier

April 20, 2004 05:51
Newer Versions of the Savage M-10 and M-110 with Accu-trigger have different contour to receiver than those with out. If yours is one of these this might be the trouble.
Most aftermarket stocks are made for older versions.
David
hoosiergunworks.com
0

Please sign in to leave a comment.

stock wont fit

Comments

Recent Activity