Need help ID'ing a Glock Mag
Sorry for the poor quality pictures, but I had my mags out today and noticed one out of my collection looked different. After checking it out, I noticed several differences.
First, it is 1/8" or so narrower than my Glock 20 (10mm mags).
Second, it is also probably 1/8" or so shorter than the Glock 20 mags.
Third, there is no markings at all on the magazine body (no caliber designation or model number) other that the Glock logo, which incidentally has "Austria" above the logo instead of below as in all my other mags. However, there is a big "U" stamped near the bottom. Even the part at the bottom, who's name totally has slipped my mind, has no markings other than the Glock logo, and does not have the hole through it like the 10mm mags do.
Similarities:
First, it is a first generation mag and has "10" stamped on the follower (which is probably why I bought it - thinking it was for a 10mm).
Second, it has markings for 15 rounds.
I'm thinking that this is most likely a .40 S&W mag (probably for a Glock 24), but I'm not sure at all. Any ideas?
Thanks guys!
First, it is 1/8" or so narrower than my Glock 20 (10mm mags).
Second, it is also probably 1/8" or so shorter than the Glock 20 mags.
Third, there is no markings at all on the magazine body (no caliber designation or model number) other that the Glock logo, which incidentally has "Austria" above the logo instead of below as in all my other mags. However, there is a big "U" stamped near the bottom. Even the part at the bottom, who's name totally has slipped my mind, has no markings other than the Glock logo, and does not have the hole through it like the 10mm mags do.
Similarities:
First, it is a first generation mag and has "10" stamped on the follower (which is probably why I bought it - thinking it was for a 10mm).
Second, it has markings for 15 rounds.
I'm thinking that this is most likely a .40 S&W mag (probably for a Glock 24), but I'm not sure at all. Any ideas?
Thanks guys!
0
-
my guess would be for a model 22 40 S&W non- drop free 0 -
just can't tell from the pics
does it function in your 20? with the diff. in dimensions I would assume that it don't, but ????
maybe 1g 24 ....
If you only have time to do two things so-so, or one thing well ... do the one thing!0 -
Could be a G22 mag. Is the length right for a 10mm cartridge?
SUPPORT THE I.N.S. , THE COUNTRY THEY SAVE COULD BE YOUR OWN0 -
OK, I forgot to mention a few things... The pictures above shows the unknown magazine next to my 10mm magazine (the 10mm is on the top on the top picture and on the left on the bottom picture).
Yes, it will fit and grab in my Glock 20, but it is sloppy as can be (it moves side to side a lot). Also, the mag length (front to back)seems to be the same also and YES I can load 10mm ammo down the tube.0
Please sign in to leave a comment.
Comments
4 comments