Skip to main content
Help Center Community Shop

WHAT IS IT ? Ammended

Comments

5 comments

  • 260
    the cal. of your handgun is .455 webley. it is a british round. you can fire .45acp through it if you use half moon clips as the .455 was rimmed. if you can find some 45 auto rim you do not need the moon clips. accuracy might not be all that good however.you can still find 455 ammo, but its as high as a cats back. hope this helps, dave
    0
  • rufe-snow
    From the patent dates on the barrel, it appears that you have 2nd Model Hand Ejector.

    These were produced for both the British & Canadians during the early years of the First World War.

    The ".455", is the cartridge it was chambered for ( standard military round used by English & Commonwealth troops)

    Correct ammo is hard to come by. Do a search of the old threads on this forum, quite a few people were looking for it. You might get a tip on finding it?

    luger_4.jpg
    0
  • rufe-snow
    quote:Originally posted by 260
    the cal. of your handgun is .455 webley. it is a british round. you can fire .45acp through it if you use half moon clips as the .455 was rimmed. if you can find some 45 auto rim you do not need the moon clips. accuracy might not be all that good however.you can still find 455 ammo, but its as high as a cats back. hope this helps, dave



    As the.455 cartridge has a thinner rim then the .45 Colt, not sure that .45 auto would work with half moon clips?, If the revolver hasn't been converted?


    In any case, if the revolver is factory original ( condition & finish ), it would have substantial value to a colector, and shouldn't be altered at this late date.

    luger_4.jpg
    0
  • 260
    i happen to have a .455 webley and have fired 45 auto rim and acp ammo thru it with moon clips. been doing it for 30 yrs.
    0
  • rufe-snow
    quote:Originally posted by 260
    i happen to have a .455 webley and have fired 45 auto rim and acp ammo thru it with moon clips. been doing it for 30 yrs.



    The Triple Lock .455 I had, had the rear part of the cylinder machined off to enable it to chamber .45 Colt. I had believed this was also required to function with half moon clips and auto rim also?

    luger_4.jpg
    0

Please sign in to leave a comment.

Recent Activity