Skip to main content
Help Center Community Shop

Need help on gun disassemble

joker5656
I have a marlin 336C .35 brand new and i need to clean it but is there a way to take out the bolt and if yes, how?


YOU BEEN NUNNED!!!! HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
0

Comments

6 comments

Date Votes
  • Ronald J. Snow
    After making sure the firearm is unloaded, open the bolt about half way, remove the lever pivot screw and pull the lever from the rifle. Grab the bolt and remove it from the rear of the action (you may find it necessary to pull down on the hammer to release pressure on the rear of the bolt). Next remove the ejector from inside the rifle, it is on the left side looking inside from the rear. Now you can clean the barrel from the receiver end.
    0
  • captkirk3@dslextreme.com
    I can see that this is gonna be one of them days......... AS My "Bestus Buddy", Mr. Pelican would say...a 5" Vise with Serated Jaws and a Hacksaw you can just about take any gun apart.......hmmmm.

    The NRA Firearms Assembly book #3 on page 86 says ...and I quote:
    For normal cleaning of the bore from the breech, and inspection of the bore, it is only necessary to open the finger lever halfway, remove finger lever screw and pull finger lever down and out of action. Thereafter, pull breech bolt all the way out of the reciever and remove the ejector from its slot in the left side of reciever...After cleaning....Putting it back together is just the reverse of taking it apart........Best....

    Captain Kirk, Tech Staff
    0
  • joker5656
    what screw? didn't see any screw but on the side of the gun and i think those are only for complete disassemble i only want to take out bolt

    YOU BEEN NUNNED!!!! HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
    0
  • Throckmorton
    The screw that the lever pivots on,not the ones on the sides of the reciever.You are trying to make something that is very very easy,difficult.:)

    Throckmorton SASS #23149
    0
  • joker5656
    it was early man, but ok, so take out lever pivot screw after u move lever half way, take lever out, then the bolt just comes out? i assume nothing else needs to be done but assemble when done.


    quote:Originally posted by Throckmorton
    The screw that the lever pivots on,not the ones on the sides of the reciever.You are trying to make something that is very very easy,difficult.:)

    Throckmorton SASS #23149


    YOU BEEN NUNNED!!!! HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
    0
  • joker5656
    cool i got it thanx for the help

    YOU BEEN NUNNED!!!! HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
    0

Please sign in to leave a comment.

Recent Activity