Skip to main content
Help Center Community Shop

Question about Martinis

mazo kid
I recently purchased a Martini Schuetzen rifle in rinfire configuration (10.4 X 38R). I'd like to find a centerfire breechblock and firing pin but need to know which size. One fellow responded to my inquiry and said it may be a special size as these rifles were built by a gunsmith rather than factory. I know it is not the large frame, but how many other frames are there? The breechblock opening in my receiver measures approx. 2-11/16" long. I know I can alter the originals, but want to save that as a last resort. I have made 10.4 X 38R ammo for my CF converted Vetterlis using 348 Win. brass. Thanks for any insight. Emery

"Well done is better than well said"
Ben Franklin
NRA Life
NMLRA Life
0

Comments

4 comments

Date Votes
  • rufe-snow
    You might try contacting the folks on this M-H site. http://www.martinihenry.com/ They might be able to help you.

    Personally I agree with your previous responder. Believe the Central European/Swiss Martini's were custom made sporting firearms. The probability of obtaining a replacement breechblock that would work without extensive modification is minus zilch.

    luger_4.jpg
    0
  • Cubslover
    I'll take one dry with 3 olives.

    "Better to carry a pistol and not need it than need a pistol and not have it." - Me

    Check this site out...
    http://www.diamondbacktactical.com/

    EMCFRtn.jpgEMT.jpgCERTnew.jpg
    0
  • v35
    Gunsmiths have converted rimfire breechblocks to centerfire by first welding up the firing pin hole then marking the center of the breechface with a well fitting, pointed rod dropped down the bore. The breech face is drilled with a firing pin sized drill till it breaks through the firing pin body hole.
    To make sure the drilled hole is coaxial with the firing pin body lathe turn a 6" rod to fit the breechblock firing pin body hole and mount it vertically in a drill press vise or chuck it in a lathe tailstock.
    If you don't take these precautions you'll break the tip of the new firing pin.
    Some of these Schutzen Martinis are totally reliant on a small breechblock pivot pin to resist chamber pressure. British Martini breechblocks rotate on a stout pin but also ride in a socket backed up by the frame. This accounts for their great strength.
    0
  • MIKE WISKEY
    WHAT V35 SAID IS RIGHT ON, I'VE CONVERTED A LOT OF MARTINI'S FROM RIMFIRE TO C.F (.22'S).
    0

Please sign in to leave a comment.

Recent Activity