Remington diamond inlay
The white diamond inlay on my model 1100 magnum fell out of the pistol grip. Are these readily available? Will it need fitted? I have seen others for sale without the diamond in the stock, is it common for them to fall out?
0
-
Inlay materials and the wood they are applied to often expand to different degrees upon changes in humidity. Since inlays are held in with glue, it is necessary for the glue to be flexible enough to retain it's adhesive qualities in order for it to hold the inlay in place as changes occur. Radical changes, like taking the piece out on misty days after it has been sitting in a dry, heated room for a lengthy period of time, accelerates the breakdown of the adhesive.
Polyurethane based glues, like "Grizzly Glue" nowadays perform much better at this task, permeating the molecular structure of the bonding surfaces better for a more permanently moisture resistant seal deeper into the materials being bonded, and capable of more flex for a longer period of time, practically forever in many applications.
If you can find the diamond inlay, wait till your piece is dry and reapply it with this kind of glue, following the instructions on the container exactly. Those inlays are common and can be ordered in many materials available widely, do a search on the internet.
Measure your opening with a dial caliper to get the exact size.
Don't forget to clean the old glue out of the relief, and do so in a fashion that avoids widening the edges, rounding them or dinging them. A square, flat wood-chisel used at a vertical inclination will do the trick. Clamp the new inlay into place using a 2" squeeze clamp with a small piece of 1/4 inch plywood over a piece of cardboard to protect the inlay.
Frog.
RiBBButt...You can't rollerskate in a buffalo herd, but you can be happy if you've a mind to. -Roger Miller0
Please sign in to leave a comment.
Comments
1 comment