Skip to main content
Help Center Community Shop

ruger 22/45

bfzmlp7
I was wondering if anyone had installed aVolquartsen 22/45 accurizing kit on their gun. I am considering it just wanted to know if it made much of a difference. I am also think of putting on a Volquartsen "Exact edge" Extractor. On occasion the brass gets jammed but that is using cheap ammo.....Any info you can give is appreciated.......
0

Comments

7 comments

Date Votes
  • bfzmlp7
    How do I get the bolt out to clean it. It's not sliding forward when it comes back and I think it needs cleaned
    0
  • notdownorout
    bfzmlp7,

    Hopefully, you have the owners manual that came with the gun! These can be a real PITA to field strip if you don't follow the exact instructions. I won't even attempt to explain the procedure. This one is best read and followed precisely.

    If you have no manual you can get the instructions off the web. Do a search on Ruger 22/45 and you will find the instructions there somewhere. Also, if you don't have a manual you can call Ruger and request a manual for your model. Manuals are sent free of charge.
    0
  • yekimak
    http://www.again.net/~steve/page7b.htm


    should have a pdf version here. it is a weird setup, but once you get used to stripping the gun, it is not too bad.

    violent-smiley-011.gif-.-.-.we are the all singing, all dancing crap of the world.-.-.-violent-smiley-011.gif
    0
  • moreammoplz
    Pull the latch on the back of the grip. Pull Down. Once latch is out then the bolt and all will come out. Clean......

    Now the tricky part. Put bolt back in... Then the grip latch into the hole in the bolt. Now before you put the grip latch back into the grip.... Turn the gun upside down and pull the trigger. You will see a metal pin looking piece in the handle and this has to slide under the grip latch or the gun won't work. Then install your grip latch. Check your manual.... PLEASE MAKE SURE GUN IS UNLOADED>>>>

    "Shoot Straight and Shoot often."
    0
  • heavyiron
    Hi,

    You can get the manual for your 22/45 pistol from this link to Ruger:

    http://www.ruger.com/Firearms/S-InstructManualsP.html

    Regards,

    Heavyiron[8D]

    bullitt_county_4199_small.jpg
    "If I don't see you nomore on this world, I'll meet you on the next one, and don't be late!" - Jimi Hendrix
    0
  • Alleno
    Also for the obivious here, if you need a manual, there is a really long paragraph stamped into your barrel, it tells you how to get a free manual. Once you figure out how to take the bolt out its not that hard, but its a real PITA the first few times.

    Alleno
    0
  • RUGERGUNZ
    http://www.1bad69.com/ruger/field_strip.htm

    Go to the link above and you will be a master at Disassembly and Reassembly in no time.

    rug.jpg

    "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
    Benjamin Franklin 1759
    0

Please sign in to leave a comment.

Recent Activity