winchester model 42
Hello to all. I am new to the forum and would appreciate some help from the experts on a Model 42. This is a fairly nice shotgun with a 26 inch barrel marked "full". The strange thing to me is it has a full length ventilated rib. By full length the rib extends all the way from the tip of the muzzel accross the receiver to the small extention at the rear of the receiver. The rib is really well done. How about it?
0
-
had a model 42 shipped in yesterday. it came disassembled. when trying to re-assemble the gun would not go back together. an examination showed the extractor is not letting the bbl seat fully into the reciever. also the cycle lever has no tension and i am unable to move the bolt. any and all ideas how i can fix this is appreciated. 0 -
ANY THING is possible pictures will let us tell you if factory or aftermarket. get a good close-up in focus from about 6 inches away of the post shape and size that holds the rib away from the barrel also a very important issue is the place of the winchester proof on back of barrel . IMHO if you have serial #1 you really need a letter on the gun to Prove how it was when built. 0
Please sign in to leave a comment.
Comments
2 comments