M&P15 Dilema

skydyver

November 30, 2009 19:24

Wanting to put a Kinghts Armament RAS rail on my M&P15, but all I've found is that it will fit on most AR-15 rifles.
KAC Upper/Lower, RAS P/N: 98064 NSN: 1005-01-452-5386
I figured I'd be able to find some specs out there, I may just be blind.

0

• 

  shoff14

  November 30, 2009 20:04

  Carbine length should work just fine. Take your handguards off, bolt the Knight's together and your good to go. Getting your old handguards off will be the hardest part. Something like this will help.
  
  http://www.gunbroker.com/Auction/ViewItem.aspx?Item=148656590
  
  You use the tool to pull the delta ring back to remove your current handguards. You can also use brute strength if you want.
  
  I should add a note here. Stay away from ebay for those handguards. There seems to be some fake ones out there.

  0
• 

  quickmajik

  November 30, 2009 23:35

  It isnt that hard to remove them by hand, set the rifle on the ground, push down on the delta ring and once you have it all the way down pull outward on one of the handguards...
  
  but if you have to bolt them together that sounds like job for three hands... the tool above would make it easier to take them on and off for monthly cleaning....

  0

Please sign in to leave a comment.